• Bandsaw Blades
• Chisels
  • Bahco Chisels - 434 Series for Tradesperson
    • Bahco Chisels - 434 Series for Tradesperson
  • Bahco Chisels - 1031 Series for Professionals
  • Carb i Tool Economy Chisels
    • Carb i Tool Economy Chisel Set
    • Carb i Tool Economy Individual Wood Chisels
• Circular Saw Blades
  • Industrial Saw Blades
    • Aluminium Cutting
      • Opteco Aluminium Saw Blade - Negative Hook
      • Opteco Aluminium Saw Blade - Positive Hook Power Fed
      • AKE Aluminium Saw Blade - Positive Hook Power Fed
      • Opteco Aluminium Saw Wax Lubricant/Grease
    • Combination Rip & Crosscut
      • Carbitool Combination Rip & Crosscut Saw Blade
    • Construction Saw Blades
      • Opteco Construction Saw Blade
    • Crosscut
      • Carbitool Crosscut Saw Blade
    • Multipurpose Saw Blades
      • AKE Multipurpose Saw Blades
      • Opteco Multipurpose Saw Blades
    • Panel & Table Saw Blades
      • AKE Alternate Top Bevel Panel Saw Blades
      • AKE Triple Chip Panel Saw Blades
      • Opteco - Alternate Top Bevel Panel Saw Blades
      • Opteco -Triple Chip Panel Saw Blades
      • Frezite Alternate Top Bevel Panel Saw Blade
    • Panel Sizing Beam Saw Blades
      • AKE Panel Beam Saw Blade
      • Opteco Panel Beam Saw Blades
    • Panel Saw & Beam Saw Scoring Blades
      • AKE -Split type Scoring Blades
      • AKE -Conical Solid type Scoring Blades
      • Opteco -Split type Scoring Blades
      • Opteco -Conical Solid type Scoring Blades
      • AKE -Set of Shims for 120mm Split Scoring Blades
      • AKE -Set of Shims for 80mm Split Scoring Blades
    • Panel Saw & Scoring Blade Sets
      • Opteco Panel Saw & Scoring Blade Sets
    • Plastic Cutting
      • AKE Hollow Face Saw Blades
      • AKE Thin Kerf Plastic Cutting
    • Radial Arm Saw
      • Carbitool Radial Arm Saw Blade
    • Ripping Saw Blades
      • Frezite Rip Saw Blades
      • Opteco Ripping Saw Blade
      • AKE Ripping Saw Blade
    • Thin Kerf Precision Sawing
      • Carbitool Thin Kerf Precision Sawing Blade
    • Tungsten Tipped Metal Cutting
      • AKE Tungsten Tipped Metal Cutting Saw Blade
    • Milling Blades-Aluminium Cutting
      • Milling Aluminium Saw Blades
    • Biscuit Cutter
      • DART Biscuit Cutter
    • Edge Band Cutters
      • AKE Edge Band Cutters
  • Portable Saw Blades
    • Aluminium Cutting
      • Carbitool Aluminium cutting Negative Rake
      • Dart Aluminium
      • IVA Aluminium & Non Ferrous Metal cutting
      • Opteco - Aluminium Saw Wax Lubricant/Grease
    • Milling Blades-Aluminium Cutting
      • Dart Aluminium Milling Saw Blades
      • IVA Aluminium Saw Blades
    • Metal Cutting
      • Metalsonic Saw Blades
    • Wood Cutting
      • Carbitool Saw Blades - Standard Kerf
      • Carbitool Saw Blades - Thin Kerf
      • Dart Wood Saw Blades- Thin Kerf
      • IVA Saw Blades - Standard Kerf
  • Dart PCD Saw Blades - Fibre Cement Sheet Blades
  • Diamond Carbitool Saw Blades
    • Diamond Saw Blade - Continuous Rim
    • Diamond Saw Blade - Laser Welded
    • Diamond Saw Blade - Turbo
  • Coolroom Panel Cutting Saw Blades
  • SAW BLADE ACCESSORIES
    • PUSH STICK 300mm
    • LONG PUSH BLOCK
    • SHORT PUSH BLOCK
    • SHORT PUSH BLOCK OFFSET
• CNC Tooling
  • Compression Spiral Cutters
    • Carbitool Single Flute Compression Bit
    • Carbitool 2 Flute Compression Bit
    • Carbitool 2 Flute - Extra Long Flute
    • Carbitool 3 Flute Compression Bit
    • Carbitool 3 Flute - Extra Long Flute Compression Bit
    • Carbitool 4 Flute Compression Bit
    • Carbitool 4 Flute - Extra Long Flute Compression Bit
    • Carbitool 4 Flute Combined Rougher/Finisher Compression Bit
    • Leading Edge 2 Flute Economical Range Compression Bit
    • Leading Edge 3 Flute Economical Range Compression Bit
  • Finishing Spiral Cutter
    • Carbitool Finishing Spiral 2 Flute Downcut for Timber
    • Carbitool Finishing Spiral 2 Flute Upcut for Timber
    • Carbitool Finishing Spiral 3 Flute Downcut for Timber
    • Carbitool Finishing Spiral 3 Flute Upcut for Timber
  • Finishing Spiral Cutters with Ball End
    • Carbitool Finishing Spiral Bit with Ball End
  • Oflute Spiral Cutter
    • Leading Edge OFlute Spiral Bit Downcut for MDF/Chipboard and Plastics
      • Leading Edge OFlute Cutter 6.35mm Shank
      • Leading Edge OFlute Cutter Parrallel shank
    • Leading Edge OFlute Spiral Bit Upcut for MDF/Chipboard and Plastics
      • Leading Edge OFlute Spiral 6.35mm shank
      • Leading Edge OFlute Spiral Parrallel shank
  • Roughing Spiral Cutters
    • Carbitool 3 Flute Chipbreaker Spiral - Downcut for Timber
    • Carbitool 3 Flute Chipbreaker Spiral - Upcut for Timber
    • Carbitool 3 Flute Roughing Cutter - Downcut for Timber
    • Carbitool 3 Flute Roughing Cutter - Upcut for Timber
    • Carbitool 4 Flute Rougher Finisher - Downcut for Timber
    • Carbitool 4 Flute Rougher Finisher - Upcut for Timber
    • Leading Edge Roughing Spiral Bit - Downcut for MDF/Chipboard
    • Leading Edge Roughing Spiral Bit - Upcut for MDF/Chipboard
    • Leading Edge Roughing Spiral Bit - Downcut for Solid Timber
    • Leading Edge Roughing Spiral Bit - Upcut for Solid Timber
  • Spiral Bits For Plastics
    • Carbitool Spiral Bit - Single Flute - Plastics Downcut
    • Carbitool Spiral Bit - Single Flute Plastics Upcut
    • Carbitool Spiral Bit - Single Flute Hard Plastics and Aluminium
    • Carbitool Spiral Bit - Single Flute Edge round for Plastic
    • Carbitool Spiral Bit - 2 Flute Foam Cutter
    • Carbitool Spiral Bit - Single Spoon Flute Aluminium and some soft Plastics
    • Carbitool Spiral Bit - 3 Flute Polystyrene Bit
  • Spiral Bits For Non Ferrous Metals Aluminium
    • Carbitool 2 Flute Spiral Bit for Non Ferrous Metals - Downcut
    • Carbitool 2 Flute Spiral Bit for Non Ferrous Metals - Upcut
    • Carbitool Spiral Bit - Single Spoon Flute Aluminium And Some Plastics
  • Diamond Tipped Tools
    • Carbitool Diamond Tipped PCD Hinge Boring Bits
    • Carbitool Diamond Tipped PCD Rounding Over Bits
    • Carbitool Diamond Tipped PCD Straight Bits Extreme Performance
    • Carbitool Diamond Tipped PCD Straight Bits High Performance
    • Carbitool Diamond Tipped PCD Straight Bits - Left Hand
    • Carbitool Diamond Tipped PCD Straight Bits - Right Hand
    • Carbitool Diamond Tipped PCD Straight Flute - Left Hand
    • Carbitool Diamond Tipped PCD Straight Flute - Right Hand
    • Carbitool Diamond Tipped PCD Vee Groove Chamfer Bits
    • Carbitool Diamond Tipped PCD Wood Boring Drills Flat Bottom
    • Carbitool Diamond Tipped PCD Wood Through Hole Drills
  • Dowell Drills
    • JSO Dowel Drills Short Series - 57.5mm
    • JSO Dowel Drills Short Series - 57.5mm Short Shank
    • JSO Dowel Drills Long Series - 70mm
    • JSO Dowel Drills Long Series - 70mm Short Shank
    • JSO Dowel Drills Long Series - 77mm
    • JSO Dowel Drills Long Series - 105mm
  • Through Hole Drills
    • JSO Through Hole Drills - Long Series 70mm
    • JSO Through Hole Drills - Long Series 77mm
    • JSO Through Hole Drills - Short Series 57.5mm
  • Hinge Boring Bits
    • JSO Hinge Boring Bit Long Series 70mm
    • JSO Hinge Boring Bit Short Series 57mm
  • JSO Collet Chucks
  • JSO Collet Chucks Spare parts
  • JSO Collets ER25
  • JSO Collets ER32
  • JSO Collets ER40
  • JSO Loose TCT Countersink bits
  • Replaceable Turnover Knives
    • Carbitool Replacable Turnover Knives - Diamond 1 Hole
    • Carbitool Replacable Turnover Knives - Rectangle 1 Hole
    • Carbitool Replacable Turnover Knives - Rectangle 1 Hole End Cut
    • Carbitool Replacable Turnover Knives - Rectangle 2 Hole
    • Carbitool Replacable Turnover Knives - Rectangle 2 Hole End Cut
    • Carbitool Replacable Turnover Knives - Rectangle 3 Hole End Cut
    • Carbitool Replacable Turnover Knives - Square 1 Hole
    • Carbitool Replacable Turnover Knives - Square 1 Large Countersink Hole
    • Carbitool Replacable Turnover Knives - Triangle 1 Hole
• Core Drills
  • Excision HSS Core Drills - 5% Cobalt - 30mm Depth
  • Excision HSS Core Drills - 5% Cobalt - 50mm Depth
  • Kreuz TCT Core Drills - 35mm Depth - tungsten tipped
  • Kreuz TCT Core Drills - 50mm Depth - tungsten tipped
  • Kreuz Core Drill Accessories
    • Core Drill Ejector Pins
  • Alfra magnetic based drilling machines - DRILLING PASTE
• Handsaws
  • Professional Range Handsaw
  • Professional Range Tenon saw
  • Professional Range Dovetail saw
  • Professional Range Gents Saw
  • Professional Range Flexible Flush Cutting Saw
  • Economy Range Wallboard Saw
  • Economy Hardpoint Handsaw
  • Economy Hardpoint Tenon Saw
  • Professional Range - Handsaws Spare Parts
  • Professional Range - Dovetail saws Spare Parts
  • Professional Range - Tenon saws Spare Parts
• Holesaws
  • HSS Bimetal -Vari-pitch General Purpose
    • Alfra Bimetal vari pitch Holesaws
  • HSS Bimetal -Constant Pitch For Fine Finish
    • ALFRA Constant pitch Holesaws
  • Starrett Ulti-Mate Rapid Release Arbor System
    • A3 Starrett Ulti-Mate Hole Saw Arbor with Pilot Drill
    • A3-6 Starrett Ulti-Mate Hole Saw Arbor with two standard adaptors
    • A3-3 Starrett Ulti-mate Adaptors to suit 14-32mm
    • A3-4 Starrett Ulti-mate Hole Saw Adaptors to suit 32mm-102mm hole saw
    • A3-5 Starrett Ulti-Mate Adaptor for 102mm holes and greater
    • A014M Starrett Ulti-Mate Replacement Pilot Drill
  • Tungsten Tipped Wood Holesaw
    • Starrett Tungsten Tipped Wood Holesaws
  • Holesaw Sets - Alfra
    • Alfra HSS Bimetal -Fine Tooth Pitch 10tpi General Purpose 12 piece set
    • Alfra HSS Bimetal -Vari-Pitch Electricians 10 piece set
    • Alfra HSS Bimetal -Vari-Pitch General Purpose 12 piece set
    • Alfra HSS Bimetal -Vari-Pitch Industrial 15 piece set
    • Alfra HSS Bimetal -Vari-Pitch Plumbers 10 piece set
    • Alfra Tungsten Tipped Holesaw - Short series 5 piece set
  • Carbitool - Carbide Tipped Holesaw
  • Tungsten Tipped Heavy Duty Holesaw - Short series
    • Alfra TCT Heavy Duty Holesaw - short series
  • Tungsten Tipped Sheet Metal Holesaw
    • Starrett Tungsten Tipped Sheetmetal Holesaws
  • ARBORS, Accessories & Spare Parts - ALFRA HSS Bimetal Holesaw
    • Alfra HSS Bimetal Holesaw Arbors
    • Alfra HSS Bimetal Holesaw Drills
    • Alfra HSS Bimetal Holesaw Ejector Spring
    • Alfra HSS Bimetal Holesaw Lubricant Paste
    • Alfra HSS Bimetal Holesaw Mandrel Bushes
    • Alfra HSS Bimetal Holesaw Screws
  • Accessories, Arbors & Spare Parts - STARRETT Holesaws
    • Starrett Arbors
    • Starrett Ejector Spring
    • Starrett Pilot Drills
    • STARRETT OOPS ARBOR
    • STARRETT HOLE SAW EXTENSION ARM
  • Accessories, Arbors & Spare Parts - Alfra TCT Short Series
    • Alfra Drill Bit for TCT Short Series 15mm-100mm
    • Alfra Ejector Spring for Tungsten Tipped Heavy Duty Holesaws - short series
    • Alfra TCT Multirange Morse Taper no 2 Arbor
    • Alfra TCT Multirange Morse Taper no 3 Arbor
  • SmartTool Adjustable Twin Blade Safety Hole Cutter
    • SMARTTOOL Adjustable Twin Blade Safety Hole Cutters
    • SmartTool Adjustable Twin Blade Safety Hole Cutter Spare Tips - HSS
    • SmartTool Adjustable Twin Blade Safety Hole Cutter Spare Tips - Tungsten
• HSS/Cold Saw Blades
  • High Speed Steel (DM05) Saw Blade
  • High Speed Steel Cobalt (HSS-E) Saw Blade
• Jigsaw Blades
  • B&D, Skill, Hitachi, Ryobi Jig Saw Blade
  • Makita Jig Saw Blade
  • Bosch, AEG, Metabo - Large End - Jig Saw Blade
  • Bosch AEG Metabo - Small End - Jig Saw Blade
• Planer Blades
  • High Speed Steel Electric Planer Blades
  • Tungsten Tipped Electric Planer Blades
• Router Bits
  • Accessories
    • Allen Keys
    • Arbors
    • Arbors with bearing
    • Bearings - Ball Bearings
    • Bearings - Carbi-Smooth Bearing Assemblies
    • Bearings - Econocut Bearings
    • Bearings - Rubber Sealed
    • Bearings - Shielded Bearings
    • Collets
      • Cone Collet
      • Stepped Collet
      • Straight Collet
    • Corner Chisel
  • Batten Mould Bit
  • Beading Bits no bearing
    • Beading Bits
    • Beading Bits Fine Point
    • Beading Bits Wide Flat Bottom
    • Beading Bit with Pilot
    • Double Beading Bits Wide Flat Bottom
    • Extended Double Beading Bits
  • Beading Bits with bearing
    • 12.7mm shank Beading Bit with bearing
    • 6.35mm shank Beading Bit with bearing
    • Beading Ogee Bits
    • Double Beading Bits Style A
    • Double Beading Bits Style B
    • Surface Beading Bit
    • Triple Beading Bits
  • Bull Nose Radius Bits
    • Bull Nose Radius Bits
      • Bull Nose Radius 6.35mm shank with Bearing
      • Bull Nose Radius 12.7mm shank with Bearing
      • Bull Nose Radius 12.7mm shank with NO Bearing
  • Canoe Slat Bits
  • Chamfering Bits
    • 5 Degrees From Vertical Chamfering Bit with Bearing
    • 10 Degrees From Vertical Chamfering Bit with Bearing
    • 22.5 Degrees From Vertical Chamfering Bit with Bearing
    • 30 Degrees From Vertical Chamfering Bit with Bearing
    • 45 Degrees From Vertical Chamfering Bit with Bearing
    • 65 Degrees From Vertical Chamfering Bit with Bearing
    • 80 Degrees From Vertical Chamfering Bit with Bearing
    • Chamfering Bits with Radius
    • Chamfering Bit with Pilot - 6.35mm shank
    • Inverted Chamfering Bits with Bearing
  • Classical Bits no bearing
    • Classical Bits no bearing
    • Traditional Classical Bits no bearing
  • Classical bits with bearing
    • Classical Bits With Bearing
    • Traditional Classical Bits With Bearing
  • Combination Bits
    • Classical Combination Bits
    • Multi Form Combination Bits
  • Core Box Bits
    • Ball End Bits
    • Core Box Bits 12.7mm shank
    • Core Box Bits 6.35mm shank
    • Half Core Box Bits 12.7mm shank
    • Round Nose Bits
  • Cove Bits
    • Classical Cove Bits with Bearing
    • Cove Bits with Pilot
    • Cove Bit with Bearing - 12.7mm shank
    • Cove Bit with Bearing - 6.35mm shank
    • Double Cove Bits with Bearing
    • Triple Cove Bits with Bearing
  • Diamond Coated Bits
    • 45 Degrees Diamond Coated Chamfer Bit
    • 45 Degrees Diamond Coated Inverted Chamfer Bit
    • Diamond Coated Rounding Over Bits
    • Diamond Coated Trim Bits
    • Replacement Bearings (Rubber sealed)
  • Diamond Tipped Bits & Tools
    • Carbitool Diamond Tipped (PCD) Hinge Boring Bits
    • Carbitool Diamond Tipped (PCD) Rounding Over Bits
    • Carbitool Diamond Tipped (PCD) Straight Bits Extreme Performance
    • Carbitool Diamond Tipped (PCD) Straight Bits High Performance
    • Carbitool Diamond Tipped (PCD) Straight Bits - Left Hand
    • Carbitool Diamond Tipped (PCD) Straight Bits - Right Hand
    • Carbitool Diamond Tipped (PCD) Straight Flute - Left Hand
    • Carbitool Diamond Tipped (PCD) Straight Flute - Right Hand
    • Carbitool Diamond Tipped (PCD) Vee Groove Chamfer Bits
    • Carbitool Diamond Tipped (PCD) Wood Boring Drills Flat Bottom
    • Carbitool Diamond Tipped (PCD) Wood Through Drills
  • Dish Cut Bits no bearing
  • Dish Cut Bits with Bearing
  • Door Panel Bits
    • Panel Door Bits - Cutter 1 - 12.7mm shank
    • Panel Door Bits - Cutter 1 - 6.35mm shank
    • Panel Door Bits - Cutter 1 - Cutter only
    • Panel Door Bits - Cutter 2 - Cutter Only
    • Panel Door Bits for Rail & Stile
  • Dovetail Bits
    • Brookman Dovetail Bit
    • Dovetail Bits - 2 Flute
    • Dovetail Bits - 2 Flute Solid Carbide
    • Dovetail Gifkins Bits
    • Dovetail Leigh Bits
    • T-Cut Dovetail Bit
  • Drawer Pull Bits - Style 1 Hidden
  • Drawer Pull Bits - Style 2 Recessed
  • Drawing Line Bits
  • Drip Seal Groover
  • Econocut Handyman/DIY Router Bits & Router Bit Kits
    • Econocut Router Bit Kits - Greenline Kit x 6.35mm (1/4") shank.
    • Econocut Router Bit Kits - Greenline Kit x 12.7mm (1/2") shank.
    • Econocut Router Bit Kits - T-Cut Budget Kit x 6.35mm (1/4") shank.
    • Econocut Beading Bits
    • Econocut Chamfering Bits
    • Econocut Classical Bits
    • Econocut Core Box Bits
    • Econocut Cove Bits
    • Econocut Dovetail Bits
    • Econocut Flush Trim Bits
    • Econocut Ogee Bits
    • Econocut Rebating Bits
    • Econocut Roman Ogee Bits
    • Econocut Rounding Over Bits
    • Econocut Straight Bits - 12.7mm Shank
    • Econocut Straight Bits - 6.35mm Shank
    • Econocut Vee Groove Bits
  • Edge & Draw Face Bit
  • Face Moulding Bits - Architraves Sills etc
    • Face Moulding Bit TFM01B 1/2
    • Face Moulding Bit TFM03B 1/2
    • Face Moulding Bit TFM06B 1/2
    • Face Moulding Bit TFM12B 1/2
    • Face Moulding Bit TFM18B 1/2
    • Face Moulding Bit TFM24B 1/2
    • Face Moulding Bit TFM30B 1/2
    • Face Moulding Bit TFM32B 1/2
    • Face Moulding Bit TFM36B 1/2
    • Face Moulding Bit TFM42B 1/2
    • Face Moulding Bit TFM48B 1/2
    • Face Moulding Bit TFM54B 1/2
    • Face Moulding Bit TFM60B 1/2
    • Face Moulding Bit TFM66B 1/2
    • Face Moulding Bit TFM72B 1/2
    • Face Moulding Bit TFM80B 1/2
  • Finger Joint Bits
    • Finger Joint Bits TAFJ60 1/2
    • Finger Joint Bits TAFJ90B 1/2
    • TFG60 Finger Slot Cutter only
    • TFJS90 Abutting Edge Cutter only
    • TFJS90 Finger Slot Cutter only
  • Flush Trimming Bits
    • 12.7mm shank Flush Trim Bit with Bearing
    • 12.7mm shank Flush trim Bit with Double Bearing
    • 12.7mm shank Flush trim bit with Down Shear
    • Diamond PCD Tipped Flush Trimming Bit
    • Flush Trimming Bit Dual Bearing
    • 6.35mm shank Flush Trim Bit with Bearing
    • 6.35mm shank Flush Trim Bit with Double Bearing
    • 6.35mm shank Overhang Trimming Bits with Bearing
    • 12.7mm shank Inverted Flush Trimming Bits with Bearing
    • 12.7mm shank Inverted Flush Trimming Bits with Down Shear
    • 6.35mm shank Inverted Flush Trimming Bits with Bearing
    • 6.35mm shank Combination Flush and Bevel Bits with Bearing
    • Combination Flush and 22 Degrees Bevel Trimming Bits
    • Combination Flush and 22 Degrees Bevel Trimming Bits Single Flute
    • 30 Degrees Bevel Trimming Bits
    • Combination Flush and 7 Degrees Bevel Trimming Bits
    • 7 Degrees Bevel Trimming Bits with Pilot
    • Combination Flush Trimming and Drilling Bits with Pilot
    • Flush Trimming Bits with Pilot
    • Edge Band Trim Bits - 15 Degrees Bevel - Left Hand
    • Edge Band Trim Bits - 15 Degrees Bevel - Right Hand
    • Edge Band Trim Bits - Left Hand
    • Edge Band Trim Bits - Right Hand
    • Handyman Range - 22 Degrees Bevel Trimming Bits with Bearing
    • Handyman Range - 2 Flute Flush Trim Bits with Bearing
    • Handyman Range - 30 Degrees Bevel Trimming Bits with Bearing
    • High Performance Professional Range - Double Flush and Bevel Trimming Assemblies - 4 Flute with Bearing
    • High Performance Professional Range - Double Flush and Bevel Trimming Bits Replacement Left Hand Trimming Cutters
    • High Performance Professional Range - Flush and Bevel Trimming Assemblies - 4 Flute with Bearing
    • High Performance Professional Range - Flush and Bevel Trimming Assemblies Replacement Trimming Cutters
    • Professional Range - Flush and Bevel Trimming Assemblies - 3 Flute with Bearing
    • Professional Range - Flush and Bevel Trimming Assemblies Replacement Trimming Cutter
    • Spiral Flute Bits with Double Bearing
  • Hook Slot Bits
  • Joining and Tongue & Groove Bits
    • Drawer Joint Bit
    • Jointing Bit
    • Mitre Lock Bit
    • Tongue and Groove Bits
      • Tongue and Groove Bits - For Floor Boards
      • Tongue and Groove Bits - For Floor Boards TAGC01 Cutter only
      • Tongue and Groove Bits - For Floor Boards TAGC02 Cutter only
      • Tongue and Groove Bits - For Wall Panel
      • Tongue and Groove Bits - For Wall Panel Bevel Cutter only
      • Tongue and Groove Bits - For Wall Panel Cutter only
      • Tongue and Groove Bits - For Wall Panel Slot Cutter only
      • Tongue and Groove Bits - For Wall Panel - Spacer only
      • Tongue and Groove Router 12.7mm shank - Style B
      • Tongue and Groove Router Bit 12.7mm Shank - Style B
      • Tongue and Groove Router Bit 12.7mm Shank TGB200 1/2 - Style B
      • Tongue and Groove Router Bit 6.35mm Shank - Style B
      • Tongue and Groove Router Bit - Style A
    • Wavy Joint Bit
  • Ogee Bits no bearing
    • Ogee Bits
    • Ogee Bits Fine Point
    • Ogee Bits Rounded Bottom Style A
    • Ogee Bits Rounded Bottom Style B
    • Ogee Bits Wide Flat Bottom
  • Ogee Bits with Bearing
    • Double Ogee Bits with Bearing
    • Ogee Bits with Bearing
    • Roman Ogee Bits with Bearing
    • Shallow Roman Ogee Bits with Bearing
  • Palace Pattern Bits with Bearing
  • Provincial Bits no bearing
    • Extended Provincial Bits
  • Provincial bits with bearing
    • Provincial Bits with Bearing
    • Provincial Bits with Inverted bearing.
  • Radius Bits
    • Double Edge Radius Bits with Bearing
    • Double Edge Radius Bits Cutter only
    • Bull Nose Radius Bits
      • Bull Nose Radius 12.7mm shank NO Bearing
      • Bull Nose Radius 12.7mm shank with Bearing
      • Bull Nose Radius 6.35mm shank with Bearing
  • Raised Panel Door Bits
    • Elliptical Beading Bits Wide Flat Bottom
    • Panel Bits Wide Flat Bottom
    • Raised Panel Bits -TOG57 1/2
    • Raised Panel Bits -TPD3 1/2
    • Raised Panel Bits -TPD4 1/2
    • Raised Panel Bits -TPD5 1/2
    • Raised Panel Bits -TPD6 1/2
    • Raised Panel Bits -TRP40B 1/2
    • Raised Panel Bits - Vertical Raised Bits TPDV3 /12
    • Raised Panel Bits - Vertical Raised Bits TPDV4 1/2
    • Raised Panel Bits - Vertical Raised Bits TPDV5 1/2
    • Raised Panel Bits - Vertical Raised Bits TPDV6 1/2
  • Rebating Bits
    • Rebating Bit with Bearing - 6.35mm shank
    • Rebating Bit with Bearing -12.7mm shank
    • Rebating Bit with Pilot - 6.35mm shank
    • Shielded Bearings for Rebate Cutters
  • Reed Bits
    • Double Reed Bit
    • Multiple Reed Bit
    • Single Reed Bit
  • Regency Bits
    • Double Regency Bit
    • Single Regency Bit
  • Replaceable Insert Router Bits
    • Straight Bits
      • 2 Flute Straight Bit with Replaceable Insert
      • 2 Flute Straight Bit - End cutting with Replaceable Insert
      • 2 Flute Straight Bit End cutting - 3 Hole with Replaceable Insert
      • Single Flute Straight Bit - End cutting with Replaceable Insert
    • Flush Trimming Bits
      • 2 Flute Flush Trim Bit Single Bearing with Replaceable Insert
      • 2 Flute Flush Trim Bit Double Bearing Single Hole with Replaceable Insert
      • 2 Flute Flush Trim Bit Single Bearing 2 Hole with Replaceable Insert
      • 2 Flute Flush Trim Bit Double Bearing with Replaceable Insert
      • 2 Flute Flush Trim Bit Single Bearing - 3 Hole Fixing with Replaceable Insert
    • Inverted Flush Trimming Bits
      • 2 Flute Inverted Flush Trim Bit - End cut Single Bearing with Replaceable Insert
      • 2 Flute Inverted Flush Trim Bit -End cut Single Bearing - 3 Hole with Replaceable Insert
    • Vee Groove Bits with Replaceable Insert
    • 22 Degrees Bevel Trimming Bits with Replaceable Insert
    • 45 Degrees Bevel Trimming Bits with Replaceable Insert
    • Surface Planers
      • 3 Flute Surface Planer
      • 4 Flute Surface Planer
    • Multi-Shape Profile Bits
      • Tool only RMS 200 1/2
      • Inserts only -201
      • Inserts only -202
      • Inserts only -203
      • Inserts only -204
      • Inserts only -205
      • Inserts only -206
      • Inserts only -207
      • Inserts only - Blank Insert 20122
      • Tool only RMS 300 1/2
      • Tool only RMS 300 16
      • Inserts only -301
      • Inserts only -302
      • Inserts only -303
      • Inserts only -304
      • Inserts only - Blank Insert 30202
    • Indexable Inserts Replacement Blades and Parts
      • Indexable Inserts Replacement Blades - Rectangle 1 Hole
      • Indexable Inserts Replacement Blades - Rectangle 1 Hole End Cut
      • Indexable Inserts Replacement Blades - Rectangle 2 Hole
      • Indexable Inserts Replacement Blades - Rectangle 2 Hole End Cut
      • Indexable Inserts Replacement Blades - Rectangle 3 Hole End Cut
      • Indexable Inserts Replacement Blades - Square 1 Hole
      • Indexable Inserts Replacement Blades - Square 1 Large Countersink Hole
      • Indexable Inserts Replacement Blades - Triangle 1 Hole
      • Indexable Inserts Replacement Blades - Diamond 1 Hole
      • Bearing Screw
      • Torx Key
      • Torx Head Screw
  • Rounding Over Bits
    • Rounding Over Bit 6.35mm (1/4") shank with Bearing
    • Rounding Over Bit 12.7mm (1/2") shank with Bearing
    • Extended Rounding Over Bits no bearing
    • Extended Rounding Over Bits with Bearing
    • 6.35mm shank Rounding Over Bit with Pilot
    • 12.7mm shank Round Over Fillet Bits with Bearing
  • Router Bit Kits
    • Econocut router bit kits
    • Three Bits Laminate Trim Set - Carbide Tipped
  • Slotting Cutters & Assemblies
    • Assemblies no bearing
      • 2 Flute Slotting Cutter Assemblies 12.7mm Shank No Bearing
      • 2 Flute Slotting Cutter Assemblies 6.35mm Shank No Bearing
      • 4 Flute Slotting Cutter Assemblies 12.7mm Shank No Bearing
      • 4 Flute Slotting Cutter Assemblies 6.35mm Shank No Bearing
    • Assemblies with Bearing
      • 2 Flute Slotting Cutter Assemblies 12.7mm Shank with Bearing
      • 2 Flute Slotting Cutter Assemblies 6.35mm Shank with Bearing
      • 4 Flute Slotting Cutter Assemblies 12.7mm Shank with Bearing
      • 4 Flute Slotting Cutter Assemblies 6.35mm Shank with Bearing
    • Slotting Cutter Only - 2 Flute Carbide Tipped 8mm Bore
    • Slotting Cutter Only - 4 Flute Carbide Tipped 12.7mm Bore
    • Slotting Cutter Only - 4 Flute Carbide Tipped 8mm Bore
  • Solid Surface Bits
    • 15 Degrees Bevel Bit - Solid surface bit
    • 15 Degrees Chamfer Bit - Solid surface bit
    • 15 Degrees Bowl Cutter - Solid surface bit
    • Bowl Bits
      • Bevel Undermount Bowl Bits - Solid surface bit
      • Roman Ogee Undermount Bowl Bits - Solid surface bit
      • Rounding Over Undermount Bowl Bit - Solid surface bit
    • Counter Top Bits
      • 2 Flute Counter Top Bit - Solid surface bit
      • 2 Flute Counter Top Bit with Bearing - Solid surface bit
      • No drip design - 2 Flute Counter Top Bit - Solid surface bit
      • No drip design - 2 Flute Counter Top Bit with Bearing - Solid surface bit
    • Face Inlay Bit - Solid surface bit
    • Flush Trim Bit - Solid surface bit
    • Overhang Trim Bit - Solid surface bit
    • Bull Nose Bits Set. Inverted Rounding Over Bit - Solid surface bit
    • Rounding Over Bits - Solid surface bit
    • Surface Planer - Solid surface bit
  • Stair Handrail Bits
    • Handrail THR40B 1/2
    • Handrail THR50B 1/2
    • Handrail THR60B 1/2
  • Straight Bits
    • Single Flute Straight Bit - Short Series 6.35mm Shank
    • Single Flute Straight Bit - Long Series 6.35mm Shank
    • Single Flute Straight Bit 12.7mm Shank
    • 2 Flute Straight Bit 6.35mm Shank
    • 2 Flute Straight Bit 12.7mm Shank
    • 2 Flute Straight Bit End Cutting 12.7mm Shank
    • Straight Bit with Down Shear 12.7mm Shank
    • Other Straight Bits
      • Combination Flush Trimming and Drilling Bits -Spiral Downcut with Pilot
      • Combination Flush Trimming and Drilling Bits with Pilot
      • Fibreglass Bits
      • Fibreglass Bits with pilot
      • Flush Trimming Bits with Pilot
      • Hinge Mortise Bits
      • Rip and Slotter Bit
      • Slot Mortise Bits
      • Straight Bit For Scheer Routers
      • Straight Bit For Staggered Tip Bits
    • Spiral Bits
      • Compression Bits
      • For Non Ferrous Metals Aluminium
      • For Plastics
      • Wood Cutting
  • Table Edge Bits
  • Table Edge Bits with Return
  • Trim Saws
    • Slotting Cutter Assemblies - 12 Teeth Solid carbide cutter
    • Slotting Cutter Assemblies with Bearing - 12 Teeth Solid carbide cutter
  • T-Slot Bits
  • Vee Groove Bits
    • 22.5 Degrees Vee Groove Bits
    • 30 Degrees Vee Groove Bits
    • 45 Degrees Vee Groove Bits
    • 60 Degrees Vee Groove Bits
    • 90 Degrees Vee Groove Bits
    • 120 Degrees Vee Groove Bits
    • 150 Degrees Vee Groove Bits
  • Veining Bits
    • Provincial Design Veining Bits
    • Veining Bits - Single Flute
  • Window Sash and Rail Bits
  • Wood Boring & Drilling Bits
    • Carbitool Adjustable Hinge Boring Bits (TCT)
    • Carbitool Dowel Drills Left Hand
    • Carbitool Dowel Drills Right Hand
    • Carbitool Drilling/Countersink Bit
    • Carbitool Drilling/Countersink with Ball Bearing Depth Stop
    • Carbitool Hinge Boring Drills
    • Carbitool Hinge Boring Drills for Bench Press Right Hand
    • Carbitool Through Hole Drills
  • Wood Boring & Drilling Bits-Toy Wheel Cutters

Leading Edge OFlute Cutter 6.35mm Shank

• Sort by: 
• Default 
• Latest 
• Name 
• Price
• ^

• Items: 
• 20 
• 50 
• 100 
• All 

• View:
• Grid 
• List 
• Mini 

• EOF.D/C.318.15.635.Z1 Australian made. Designed for use in CNC Machining centres to process MDF/Chipboard panels & Plastics. Superior cutting performance at an economical price.  PLEASE CALL OUR OFFICE TO CHECK AVAILABLITY BEFORE PLACING YOUR ORDER. THANK YOU.  Goods deliver between 2-5 business days. Allow up to 7 days for remote areas. Diameter 3.18mm Shank 6.35mm Cutting Length 15mm Overall Length 50mm Downcut Right Hand

  $71.50

  QTY:

  Add to Cart



• EOF.D/C.4.15.635.Z1 Australian made. Designed for use in CNC Machining centres to process MDF/Chipboard panels & Plastics. Superior cutting performance at an economical price. Goods deliver between 2-5 business days. Allow up to 7 days for remote areas. Diameter 4mm Shank 6.35mm Cutting Length 15mm Overall Length 50mm Downcut Right Hand

  $71.50

  QTY:

  Add to Cart



• EOF.D/C.476.15.635.Z1 Australian made. Designed for use in CNC Machining centres to process MDF/Chipboard panels & Plastics. Superior cutting performance at an economical price. Goods deliver between 2-5 business days. Allow up to 7 days for remote areas. Diameter 4.76mm Shank 6.35mm Cutting Length 15mm Overall Length 50mm Downcut Right Hand

  $71.50

  QTY:

  Add to Cart



• EOF.D/C.476.20.635.Z1 Australian made. Designed for use in CNC Machining centres to process MDF/Chipboard panels & Plastics. Superior cutting performance at an economical price. Goods deliver between 2-5 business days. Allow up to 7 days for remote areas. Diameter 4.76mm Shank 6.35mm Cutting Length 20mm Overall Length 65mm Downcut Right Hand

  $71.50

  QTY:

  Add to Cart



• EOF.D/C.6.15.635.Z1 Australian made. Designed for use in CNC Machining centres to process MDF/Chipboard panels & Plastics. Superior cutting performance at an economical price. Goods deliver between 2-5 business days. Allow up to 7 days for remote areas. Diameter 6mm Shank 6.35mm Cutting Length 15mm Overall Length 50mm Downcut Right Hand

  $71.50

  QTY:

  Add to Cart



• EOF.D/C.6.25.635.Z1 Australian made. Designed for use in CNC Machining centres to process MDF/Chipboard panels & Plastics. Superior cutting performance at an economical price. Goods deliver between 2-5 business days. Allow up to 7 days for remote areas. Diameter 6mm Shank 6.35mm Cutting Length 25mm Overall Length 65mm Downcut Right Hand

  $71.50

  QTY:

  Add to Cart



• EOF.D/C.635.15.635.Z1 Australian made. Designed for use in CNC Machining centres to process MDF/Chipboard panels & Plastics. Superior cutting performance at an economical price. Goods deliver between 2-5 business days. Allow up to 7 days for remote areas. Diameter 6.35mm Shank 6.35mm Cutting Length 15mm Overall Length 50mm Downcut Right Hand

  $71.50

  QTY:

  Add to Cart



• EOF.D/C.635.25.635.Z1 Australian made. Designed for use in CNC Machining centres to process MDF/Chipboard panels & Plastics. Superior cutting performance at an economical price. Goods deliver between 2-5 business days. Allow up to 7 days for remote areas. Diameter 6.35mm Shank 6.35mm Cutting Length 25mm Overall Length 65mm Downcut Right Hand

  $71.50

  QTY:

  Add to Cart