Carbitool Single Flute Compression Bit


  • TSRM123/8

    Single Flute Compression (up/down) Spiral Bits - The geometry of these tools prevents the chipping and furring on the top and bottom surfaces of the material being cut. Ideal for cutting double sided laminates (melamine, vinyl, spray coatings, painted board etc) as well as natural timbers. 3 and 4 Flute tools allow for increased high speed machining with high spindle speeds.

    Goods deliver between 2-5 business days. Allow up to 7 days for remote areas.

    A= Diameter 9.53mm
    B= Height 25.4mm
    C= Overall Length 76.2mm
    SHANK 9.53mm

    $82.50


  • TSRM10M

    Single Flute Compression (up/down) Spiral Bits - The geometry of these tools prevents the chipping and furring on the top and bottom surfaces of the material being cut. Ideal for cutting double sided laminates (melamine, vinyl, spray coatings, painted board etc) as well as natural timbers. 3 and 4 Flute tools allow for increased high speed machining with high spindle speeds.

    Goods deliver between 2-5 business days. Allow up to 7 days for remote areas.

    A= Diameter 10mm
    B= Height 25mm
    C= Overall Length 75mm
    SHANK 10mm

    $82.50


  • TSRM12M

    Single Flute Compression (up/down) Spiral Bits - The geometry of these tools prevents the chipping and furring on the top and bottom surfaces of the material being cut. Ideal for cutting double sided laminates (melamine, vinyl, spray coatings, painted board etc) as well as natural timbers. 3 and 4 Flute tools allow for increased high speed machining with high spindle speeds.

    Goods deliver between 2-5 business days. Allow up to 7 days for remote areas.

    A= Diameter 12mm
    B= Height 32mm
    C= Overall Length 75mm
    SHANK 12mm

    $104.50


  • TSRM161/2

    Single Flute Compression (up/down) Spiral Bits - The geometry of these tools prevents the chipping and furring on the top and bottom surfaces of the material being cut. Ideal for cutting double sided laminates (melamine, vinyl, spray coatings, painted board etc) as well as natural timbers. 3 and 4 Flute tools allow for increased high speed machining with high spindle speeds.

    Goods deliver between 2-5 business days. Allow up to 7 days for remote areas.

    A= Diameter 12.7mm
    B= Height 31.8mm
    C= Overall Length 76.2mm
    SHANK 12.7mm

    $104.50


  • TSRM16M

    Single Flute Compression (up/down) Spiral Bits - The geometry of these tools prevents the chipping and furring on the top and bottom surfaces of the material being cut. Ideal for cutting double sided laminates (melamine, vinyl, spray coatings, painted board etc) as well as natural timbers. 3 and 4 Flute tools allow for increased high speed machining with high spindle speeds.

    Goods deliver between 2-5 business days. Allow up to 7 days for remote areas.

    A= Diameter 16mm
    B= Height 35mm
    C= Overall Length 92mm
    SHANK 16mm

    $168.20


  • TSRM20M

    Single Flute Compression (up/down) Spiral Bits - The geometry of these tools prevents the chipping and furring on the top and bottom surfaces of the material being cut. Ideal for cutting double sided laminates (melamine, vinyl, spray coatings, painted board etc) as well as natural timbers. 3 and 4 Flute tools allow for increased high speed machining with high spindle speeds.

    Goods deliver between 2-5 business days. Allow up to 7 days for remote areas.

    A= Diameter 20mm
    B= Height 40mm
    C= Overall Length 104mm
    SHANK 20mm

    $261.50

Showing 1 — 6 of 6

Copyright © 2011 Cutting Edge Saws. All Rights Reserved.